Every successful building tells its story at the thresholds. A door frames the first impression, negotiates light and privacy, regulates climate and noise, and sets the rhythm of daily use. For a Houston builder or facility manager, getting doors right is a blend of engineering, code compliance, and practical judgment. From early drawings to punch lists, a seasoned door supplier can be the quiet force that keeps a project on schedule and within budget, while delivering the style and performance the owner expects.

This is a walk through the full door lifecycle as it actually happens in Houston. It covers selection, codes, finishes, hardware, lead times, and the pitfalls that frequently stall jobs. Whether you’re coordinating a multifamily mid-rise near the Med Center or retrofitting a restaurant in the Heights, the path from concept to completion runs straight through a dependable door supply company Houston builders can trust.

Starting at the drawings, not the catalog

Most headaches are baked in at the beginning. On paper, a door looks simple: size, swing, fire rating, hardware set. In practice, those four variables touch at least six trades and a half-dozen code requirements. The better residential door supplier Houston teams work with will insist on reviewing the door and hardware schedule while architects are still refining elevations. It’s not about selling more SKUs, it’s about sorting conflicts before they ripple.

On a mixed-use building off Kirby Drive, we caught one of the classic problems early. The plan called for oversize vision lites on several corridor doors rated at 90 minutes. The glass spec was correct for 45-minute assemblies but not 90. Changing the lite size after the submittal phase would have forced re-framing and delayed inspections. Because the door distributor Houston designers looped in our shop drawings early, we corrected the vision panel sizes and glazing type before anyone cut steel.

If you build in Houston long enough, you learn that preconstruction coordination is where the door package either saves you time or burns it. This is especially true on commercial cores with access control. Integrating power transfer hinges, request-to-exit sensors, and electrified latches requires precise handing and hinge location, and the frame needs proper reinforcement at the factory. Trying to retrofit those details on site is like threading a needle with gloves on.

Houston codes and the quirks that matter

Houston follows the International Building Code with local amendments, and the Texas Department of Insurance rules apply when you’re in windstorm zones. In practical terms, that means three recurring checkpoints:

Fire ratings. Stair enclosures, corridors in certain occupancies, and tenant separations often require 45, 60, or 90-minute assemblies. The assembly rating covers door plus frame plus hardware, not just the leaf, so substitutions need a listed match. For example, swapping a mortise lock for a cylindrical set on a rated door is simple only if the door’s label allows it. When the listing doesn’t, you end up replacing the slab late in the job.

Egress. Clear width, swing direction near occupant loads, and hardware returning to latch are table stakes. In healthcare occupancies and education projects, special locking arrangements or delayed egress may come into play, and those trigger additional signage, electrics, and coordination with the fire marshal. On a Houston ISD renovation a few years back, one mislabeled delayed egress device cost a week because we had to rewire the power supply and retest with the AHJ present.

Windborne debris. East and southeast Houston can fall under windstorm requirements. When exterior doors are part of the envelope, choose assemblies with proper impact ratings and anchorage details, including thresholds and mullions. The frame anchors specified for a standard hollow metal opening might not satisfy a WPI-8 inspection. We’ve seen jobs pass structural inspections, then get flagged in the windstorm review for missing fasteners that were never ordered.

A competent door supply company Houston contractors rely on keeps a running playbook of these local nuances. If a supplier shrugs off code conversations with “your architect will tell us,” that’s a sign they’re an order taker, not a partner.

Materials and where they shine

You can tell a lot about the life a door will lead by the first ten minutes of conversation. What’s the humidity like in the space? Who touches this door every day? Is there a kitchen nearby? Do delivery carts hit the frame twice before lunch?

Hollow metal. The backbone of commercial openings. It’s durable, reasonably priced, and configurable for fire ratings and sidelites. In Houston’s humid climate, galvannealed steel with a factory primer holds up better than cold rolled. The difference shows up after a summer of mop water and AC condensate. At a grocery buildout in Meyerland, we replaced three cold rolled frames within a year due to rust near the base where cleaning crews over-wet floors. We now spec galvannealed as the default in any space washed down regularly.

Stainless steel. Kitchens, labs, coastal exposure, or anywhere corrosive agents and constant cleaning create a harsh environment. The upfront cost is higher, but lifecycle cost falls fast when you avoid repainting and corrosion repair. We like to pair stainless frames with FRP doors in prep areas. FRP takes abuse that would splinter wood or dent steel, and color runs through the skin, hiding scratches.

Wood veneer and stain-grade. For condo lobbies, boutique offices, and hospitality, wood still wins hearts. Don’t skimp on core selection. A mineral core can hit the fire rating but changes the weight, so hinges and closers must be upsized. In high humidity entries, specify laminated veneer lumber stiles and rails, and finish all edges before installation. Houston’s AC cycles create massive vapor pressure differences between indoors and outdoors. Unsealed top edges of the slab will telegraph that stress in a week.

Fiberglass and FRP. Unbeatable in corrosive or high-abuse settings: pool enclosures, wastewater treatment rooms, or food processing. They don’t rust, they don’t delaminate easily, and they take a beating. In a Galveston hotel renovation, we swapped eight metal doors at the pool deck for FRP with stainless frames and haven’t had a callback in four years, despite salt air and sunscreen-coated hands tugging at levers all day.

Aluminum storefront and glass. When transparency and daylight matter, storefront or full glass doors are the move. They demand careful coordination with glazing and access control, especially with concealed vertical rods or electric strikes. The common trap is forgetting that some access control devices void the glass door’s listing unless you use approved rail hardware. Get the shop drawings aligned with the hardware schedule before the glazing contractor orders tempered lites.

A residential door supplier Houston homeowners call for custom looks should still walk through humidity and exposure, especially for coastal second homes. A beautiful mahogany slab with a south-facing exposure and no storm door will drink sunlight and warp. UV-rated finishes and proper overhang depth are not “nice to haves” here, they define lifespan.

Hardware: where the details decide the day

Hardware is where projects either glide or grind. The spec book might call for a Grade 1 lever and closer, but brand substitutions and function changes hide landmines. A commercial door supplier Houston builders trust will read hardware the way an electrician reads a single-line diagram, tracing power, fire alarm tie-ins, and convenience functions.

Grade and finish. ANSI/BHMA grades tie directly to cycles and abuse. Grade 1 is the right call for schools, healthcare, and busy corridors. Finish decisions are more about maintenance. In coastal contexts or wet processing, 316 stainless is worth the premium. On interior doors, 626 satin chrome hides fingerprints better than polished brass and matches most modern aesthetics.

Closers and swings. The wrong closer is like a bad knee. It works until humidity or heavy use exposes the weakness. Houston’s air pressure differentials, especially in buildings with strong HVAC and vestibules, demand adjustable backcheck and delayed action in some locations. On fire doors, ensure the closer arm doesn’t block signage or run afoul of clearance requirements.

Electrified hardware. If you integrate access control, decide early between electric strikes, electrified panic devices, or mag locks. Each choice ripples through power supplies, transfer hinges, door prep, and inspection outcomes. In a Sugar Land office build, the original spec called for mag locks with REX sensors on IT room doors. Switching to electrified locks late in the schedule triggered field routing in hollow metal frames and delayed ceiling close-in for power routing. We could have avoided all of it with a day of coordination during design development.

Hinges and pivots. Heavy doors and high-use entries need bearings or continuous hinges. Ball-bearing butt hinges are a reliable default. On full-height heavy glass or oversize wood slabs, consider floor closers or offset pivots, and make sure slab thickness and edge hardware are compatible. The last ten degrees of closing is where users form opinions about quality.

Accessories. Door stops, kick plates, silencers, and thresholds aren’t glamorous, but their absence is what people notice. In flood-prone areas, interlocking thresholds and proper seal kits can save finishes after a summer storm. In healthcare, silent latches and rubber silencers reduce nighttime noise in patient areas. We’ve fielded service calls just to add silencers that cost less than coffee for the crew.

Lead times and the art of staging

The fastest way to torpedo a schedule is to treat doors like commodity widgets with predictable lead times. They aren’t. Supply chains have stabilized since the worst disruptions, but custom veneers, specialized glazing, and electrified hardware still stretch lead times.

Stock hollow metal frames and slabs can land in days. Add welded frames with custom anchors, and you’re looking at two to four weeks. Add factory-installed glazing, and tack on another week. High-end veneers, custom stains, and shop-applied prefinish can push to six to ten weeks. Electrified exit devices are usually three to five weeks if you’re lucky, longer during peak quarters.

The trick is to separate rough-in needs from final install and stage accordingly. We often ship frames first, with struts and anchors matched to wall types, and hold doors and hardware until drywall and paint catch up. On a 180-door multifamily project near Greenway Plaza, we staged in three drops: rough frames, then unit interior doors, then common areas with specialty hardware. It kept hallways clear and allowed us to chase punch items without moving a mountain of boxed hardware twice.

Submittals, shop drawings, and what to scrutinize

A thorough submittal package isn’t just a box checked for the GC. It’s how you avoid paying twice for the same opening. The narrative is as important as the page stack. A good door distributor Houston project managers appreciate will include schedules keyed to plan numbers, elevations for unusual conditions, hardware templates, finish samples, and cut sheets for electrified pieces showing amperage and wire counts.

Here are the trouble spots to review with a pen in hand:

Handing and swing on paired doors, especially with astragals or coordinator bars.
Undercut dimensions relative to flooring transitions and thresholds.
Vision lite sizes versus fire listings and glass type.
Frame anchors matched to wall types and fire ratings.
Backset and prep compatibility when swapping hardware brands.

A five-minute review on any of these can prevent an all-day field correction that sets painters, flooring installers, and electricians at odds.

Residential realities: beauty, privacy, and noise

On the residential side, the conversation tilts toward aesthetics, privacy, and acoustic comfort. A residential door supplier Houston homeowners keep calling back understands the balance between design intent and durability. Interior hollow-core doors save cost, but in townhomes with shared party walls and open plans, solid-core doors give better privacy and a weightier feel. For primary suites, we recommend solid-core with high-quality latches because nothing cheapens a space like a tinny handle and thin slab.

For exteriors, fiberglass doors have come a long way. Texture and grain mimic wood convincingly, and the insulation bump is real. Pair them with high-quality weatherstripping and an adjustable sill, and you’ll feel the difference in August when the west sun hits. If you must have wood, plan for finish maintenance and choose species with better stability in humidity, like sapele over pine.

Garage-to-house doors deserve special mention. Code frequently requires a self-closing device and a fire-rated slab. Homeowners often dislike the feel of spring hinges that slam. A low-profile closer with delayed action, adjusted correctly, solves behavior issues while meeting code and keeping fumes out of living spaces.

Commercial use cases: schools, clinics, and retail

In schools, hardware grading and tamper resistance define longevity. Lever sets with freewheeling clutches survive abusive torque better, and covers that shield cylinder screws keep idle hands from creating mischief. In clinics and medical offices, privacy and accessibility control the spec. We frequently use anti-ligature hardware in behavioral health spaces and specify continuous hinges to eliminate pinch points on patient rooms.

Retail needs speed. Doors must install quickly and survive carts and constant cleaning. Aluminum storefront with continuous hinges at busy entries, hollow metal in back-of-house with kick plates and wall bumpers, and a thoughtful lock schedule that balances loss prevention with emergency egress makes everyone’s life easier. On a chain restaurant rollout across greater Houston, standardizing three hardware sets across fifty stores cut learning curves for service techs and slashed spare-parts inventory.

Installation: what good looks like

The prettiest spec fails when installation is sloppy. A frame out of plumb by even a quarter inch telegraphs as a dragging latch or a closer that fights users. We aim for tolerances tighter than industry minimums because Houston humidity amplifies small errors. Plumb within 1/16 inch over the height, square and level both ways, anchors tight but not distorting the throat. If you’re setting welded frames in CMU, pack grouted cells so the frame is supported, not floating.

Weather seals often get treated as an afterthought. They shouldn’t. On exterior openings, a continuous bead of high-quality sealant at frame perimeters prevents water from wicking behind casing and ruining drywall. Threshold fasteners need predrilling and sealant at every hole, especially over slab joints that can wick moisture. The time investment is minutes; the payoff is years of door supplier dryness and quiet.

Hardware adjustments belong in the installer’s toolkit, not in a punch list. Closer speeds, latch engagement, lever returns, electric strike alignment, and sensor ranges need tuning in situ. We bring a portable power supply for electrified devices and run them before ceiling close-in. You can tell the difference when the AHJ arrives and every opening behaves like a finished product.

Service and lifecycle: the part few plan for

Treat doors like mechanical systems and you’ll think differently about maintenance. Hinges need lubrication annually in high-use settings. Gaskets compress and lose elasticity. Closers leak internally long before they drip externally. Pulls and levers loosen with vibration. A commercial door supplier Houston facility teams rely on will propose a maintenance rhythm and stock common replacement parts. A modest service contract beats emergency calls every time.

On a medical office building in Westchase, we tracked warranty calls over three years. The patterns were predictable: unadjusted closers at six months, loose lever roses at a year, worn weatherstripping at eighteen months on windward elevations. We built a kit for the property manager with gaskets, screw packs, lubricant, and two spare closers. After that, emergency calls fell by two-thirds.

For residential clients, education matters more than service. Show homeowners how to clean finishes without harsh chemicals, how to check and adjust strike plates as houses settle, and when to call for a hinge swap rather than forcing a sticky door through summer swell. It’s straightforward advice, but it turns “my door is cheap” into “my door needs a five-minute tweak.”

Working with a supplier: signals of a strong partner

Not all suppliers are created equal. A reliable door supplier shows its value long before a quote turns into a truck on site. Look for a team that asks about wall types and electrical rough-ins, not just sizes and finishes. Ask how they handle substitutions when the specified item is backordered. We’ve maintained a matrix of equivalent listings across major brands so we can pivot midstream without jeopardizing compliance.

Communication matters. If a door supplier Houston teams talk about updates using hard dates and tracking numbers rather than promises, you can build around them. When we miss a date, we say so early and bring alternatives. On a Downtown retrofit during hurricane season, when a shipment of 90-minute doors was delayed, we installed temporary 20-minute units with clear signage to keep trades moving, then swapped them on a Saturday to avoid interfering with weekday inspections. It cost us extra effort, but it kept the GC’s schedule whole.

Finally, transparency about cost. Doors carry hidden variables: preps, reinforcements, freight, and shop labor. A clean quote lists each element. If a bid looks too simple, it usually is. The most expensive door on a project is the one you have to buy twice.

From concept to completion, and the win at the end

A well-executed door package doesn’t attract attention, it simply works. Guests glide in without fighting the closer, teachers secure a classroom without a second thought, maintenance teams replace a gasket in minutes, and inspectors sign off because the labels, latches, and clearances match the book. That outcome starts months earlier with the right door supplier houston partner.

The arc is consistent. Start with a clear schedule and code map. Choose materials that respect Houston’s humidity, storms, and sun. Specify hardware as a system, not a grab bag. Stage deliveries to match construction reality, not warehouse convenience. Install with care, test with discipline, and maintain with intention. A capable door supply company Houston builders trust will guide you at each step, not with a stack of catalogs, but with the quiet confidence that comes from solving the same problems a hundred different ways across the city.

If you need a residential door supplier Houston homeowners can rely on for custom looks that last, or a commercial door supplier Houston GCs count on for complex hardware and compliance, the real measure is how they think before they sell. Doors seem simple. Buildings teach otherwise. The right thresholds, built and installed with craft, are the difference between a space that merely closes and a space that truly works.

All Kinds Of Doors
Address: 13714 Hempstead Rd, Houston, TX 77040
Phone: (281) 855-3345

All Kinds Of Doors

Since our first days in the business, All Kind of Doors has remained committed to providing top quality garage doors, installation, and repair services to Houston residents and businesses. We specialize in residential and commercial garage doors, entry doors, installation, and repair, with customer safety and satisfaction as our top priorities.

View us on Google Maps

13714 Hempstead Rd
Houston, 77040
US

Business Hours

Monday: Open 24 hours
Tuesday: Open 24 hours
Wednesday: Open 24 hours
Thursday: Open 24 hours
Friday: Open 24 hours
Saturday: Open 24 hours
Sunday: Open 24 hours

Connect With Us

All Kinds Of Doors is a company All Kinds Of Doors is based in Houston Texas All Kinds Of Doors is located at 13714 Hempstead Rd Houston TX 77040 All Kinds Of Doors phone number is 281 855 3345 All Kinds Of Doors website is [https://www.allkindsofdoors.com/](https://www.allkindsofdoors.com/) All Kinds Of Doors was established in 2008 All Kinds Of Doors is a family owned business All Kinds Of Doors provides garage door installation services All Kinds Of Doors provides garage door repair services All Kinds Of Doors supplies residential garage doors All Kinds Of Doors supplies commercial garage doors All Kinds Of Doors supplies entry doors All Kinds Of Doors provides wood entry doors All Kinds Of Doors provides fiberglass entry doors All Kinds Of Doors provides steel entry doors All Kinds Of Doors provides iron entry doors All Kinds Of Doors provides storm doors All Kinds Of Doors serves Houston residents All Kinds Of Doors serves Houston businesses All Kinds Of Doors offers free estimates All Kinds Of Doors offers residential garage doors in over 20 styles All Kinds Of Doors offers residential garage doors in over 200 colors All Kinds Of Doors prioritizes customer safety All Kinds Of Doors prioritizes customer satisfaction All Kinds Of Doors uses products from reputable suppliers All Kinds Of Doors operates 24 hours a day All Kinds Of Doors operates seven days a week All Kinds Of Doors has a Facebook page at [https://www.facebook.com/allkindsofdoors](https://www.facebook.com/allkindsofdoors) All Kinds Of Doors has an Instagram profile at [https://www.instagram.com/allkindsofdoors/](https://www.instagram.com/allkindsofdoors/) All Kinds Of Doors was awarded Houston Trusted Garage Door Service Award All Kinds Of Doors won Local Customer Satisfaction Excellence Recognition All Kinds Of Doors received Family Owned Business Service Excellence Award

What types of doors can I buy from a door supplier in Houston?

At All Kinds Of Doors in Houston, we repair, install, and supply all kinds of doors for homes and businesses. Customers commonly choose from residential garage doors (with over 20 styles and 200 colors), durable commercial garage doors for reliable daily operation, and entry doors that add curb appeal and security. If you’re looking for wood, fiberglass, steel, iron, or storm doors, our trusted door service professionals can help you compare options and select the best fit for your property.

How do I choose the best door supplier in Houston for my project?

The best door supplier in Houston should offer quality products from reputable suppliers, professional installation, dependable repairs, and service you can trust. Since 2008, All Kinds Of Doors has stayed committed to customer safety and satisfaction by delivering long-lasting performance and excellent customer service. As a family business, we focus on clear communication, reliable workmanship, and practical recommendations that match your needs and budget.

How much does it cost to buy and install a door in Houston?

The cost to buy and install a door in Houston depends on the door type, size, material, style, and the condition of the opening or existing hardware. For example, residential garage doors can vary widely based on insulation, design, and color, while commercial doors are often priced based on durability requirements and usage demands. All Kinds Of Doors makes it easy to understand your options by offering a free estimate, so you can get accurate pricing for your specific project before you commit.

Do Houston door suppliers offer custom door design services?

Yes, many Houston door suppliers offer customization, and All Kinds Of Doors provides plenty of options to match your home or business style. For residential garage doors, you can choose from many styles and a wide range of colors to create the look you want. For entry doors, we can guide you through wood, fiberglass, steel, iron, and storm door collections so you can balance appearance, durability, and security based on your goals.

Can a door supplier in Houston handle commercial and residential projects?

All Kinds Of Doors serves both residential and commercial customers throughout Houston, providing the right solutions for each type of property. Homeowners often need attractive, dependable garage doors and entry doors that improve security and curb appeal, while businesses need durable commercial garage doors that support smooth daily operations. Our team understands the different performance needs of homes and commercial sites and helps you choose doors built for long-term reliability.

How long does it take for a Houston door supplier to deliver and install doors?

Timelines for delivery and installation can vary depending on the door type, availability, and whether you’re choosing a standard option or a customized style. In many cases, repairs can be completed quickly, while new installations may take longer based on product selection and scheduling. All Kinds Of Doors is open 24 hours to better support Houston customers, and we work to schedule service efficiently so you can get back to safe, smooth door operation as soon as possible.

Do door suppliers in Houston provide door hardware and accessories?

Yes, door suppliers often provide the components needed for safe operation, and All Kinds Of Doors uses high-quality parts to support long-lasting performance. Whether you need hardware related to garage door systems or accessories that improve function and reliability, our trusted door professionals can recommend the right parts for your specific setup. Using quality components helps reduce future issues and keeps your door operating smoothly.

What warranties or guarantees do Houston door suppliers offer?

Warranty coverage and guarantees vary by supplier and product, and it can depend on the manufacturer and the type of door installed. At All Kinds Of Doors, we prioritize customer satisfaction and aim to exceed expectations by using high-quality parts and providing dependable installation and repair work. If you have questions about coverage for your specific door or service, our team can walk you through what applies to your project during your free estimate.

Can I get energy-efficient or heavy-duty doors from Houston suppliers?

Yes, you can find energy-efficient and heavy-duty options through a Houston door supplier, and All Kinds Of Doors can help you choose the right solution for your property. For homes, an upgraded garage door or entry door can support comfort and performance depending on materials and build quality. For businesses, a durable commercial garage door is essential for dependable operation, and we help business partners select options designed for strength, safety, and frequent use.

Where can I find reviews of top door suppliers and installers in Houston?

A good place to start is the company’s official online profiles and website so you can see updates, photos, and customer feedback. You can explore All Kinds Of Doors online at https://www.allkindsofdoors.com/ and follow us on social media for additional information and updates at https://www.facebook.com/allkindsofdoors and https://www.instagram.com/allkindsofdoors/. If you’d like to speak with a trusted door service professional directly, you can also call (281) 855-3345 for a free estimate.

Searching for a reliable door supplier in Space Center Houston , All Kinds Of Doors is ready to help with door repair, installation, and supply for property owners and business operators. We deliver quality parts, expert service, and lasting results. Call (281) 855-3345 anytime to schedule your free estimate.

Houston Door Supply Company: From Concept to Completion